How Can We Support You?
This page was created to help support you and your team with easy to follow along steps on how to quickly assemble these vehicle mount kits. Please browse the diagrams below.
If futher assistance is needed, call us at 888-621-5558
CLE Pole Camera
Step 1: Unbox the package and remove the bubble wrap. Inside the kit, you will find a tripod stick and a bracket.
Step 2: Position the mount handles in the passenger-side seat area or the middle of the car seats. Adjust the mount to your desired customizable length for optimal placement.
Step 3: Secure the mount by attaching it from the top of the car roof to the seat, ensuring it latches firmly in place.
Step 4: Once the mount is sturdy, attach the vehicle bracket onto the mount in your preferred position.
Step 5: Tighten both knobs securely to lock it in place.
Step 6: Connect the DPM Pole Camera connection cords to the camera.
Step 7: Then, twist the camera onto the vehicle mount, ensuring it is firmly secured.
DPM Pole Camera
Step 1: Unbox the package and remove the bubble wrap. Inside the kit, you will find a tripod, CLE Pole Camera Bracket, and vehicle mount connector cord.
Step 2: Position the vehicle mount inside the car at the desired location. Adjust length to securely extend from the car roof to the top of the seat, ensuring a firm and stable fit.
Step 3: Secure the mount by firmly attaching it from the roof to the seat, making sure it latches tightly in place and does not shift.
Step 4: Unpin the cord from the T Pin and attach it to the vehicle mount bracket.
Step 5: Attach the DPM Pole Camera to the vehicle mount bracket using the T Pin bolt and handle.
Step 6: Connect the mount to the DPM Pole Camera and securely tighten all knobs to lock it in place.
Step 7: Once everything is set up, power on the DPM Pole Camera System.
Step 8: Connect the battery pack to the system and open the covert compartment of the DPM Pole Camera when deploying it in a drop vehicle setup. This ensures a clear view of the surrounding area.
Tripod Mount
Step 1: Unbox the package and remove the bubble wrap. Inside the kit, you will find a tripod, CLE Pole Camera Bracket, and vehicle mount connector cord.
Step 2: Extend the Legs of the tripod. Place the tripod on a flat, stable surface. Unlock the leg locks (flip or twist depending on the model). Extend the legs to your desired height. Lock the legs securely to prevent movement.
Step 3: Attach the Camera to the Tripod. Locate the mounting bracket. Detach the plate and screw it onto the side of the DPM Pole Camera. Reattach the plate to the tripod head and tighten it securely.
Step 4: Adjust the Tripod Head to desired height. Use the pan and tilt handles or ball head knobs to adjust the camera angle. Lock the head in place once you have the desired position. Then connect the power source cords to the battery pack for use.
