This is a review of the field of view on the camera, and information on how to adjust the horizon line if your investigation requires it.
The camera is designed to look down, so some items on the distant horizon may not be in the field of view if the camera is not positioned appropriately.
The camera angle will not allow for the camera to zoom in on items that are high up on the horizon, like the areas in red. The area in green is ideal area for zooming. The camera has a line on the protective bubble that can distort light on the areas that are high on the horizon.
If the horizon line on the bubble is a problem it can be removed. However, the removal of the bubble will void the warrantee on any damage that the bubble could have prevented. Please retain the bubble after removing it, as this is needed for any warrantee claims that may be made.
Remove all 4 screws on the exterior of the camera. Turn the bubble over and remove 4 screws on the interior of the bubble.
Remove the plastic bubble and replace the black inner ring and screws. Keep the bubble. Replace the exterior ring.
[alert type="danger" icon-size="normal"]Removal of the protective bubble will void the warranty on any damage that is a result of the bubble missing.[/alert][alert type="danger" icon-size="normal"]This button pointed to by the red arrow will reset the camera and require reprogramming. DO NOT Allow it to be pushed. [/alert]
The camera is designed to look down, so some items on the distant horizon may not be in the field of view if the camera is not positioned appropriately.
The camera angle will not allow for the camera to zoom in on items that are high up on the horizon, like the areas in red. The area in green is ideal area for zooming. The camera has a line on the protective bubble that can distort light on the areas that are high on the horizon.
If the horizon line on the bubble is a problem it can be removed. However, the removal of the bubble will void the warrantee on any damage that the bubble could have prevented. Please retain the bubble after removing it, as this is needed for any warrantee claims that may be made.
Remove all 4 screws on the exterior of the camera. Turn the bubble over and remove 4 screws on the interior of the bubble.
Remove the plastic bubble and replace the black inner ring and screws. Keep the bubble. Replace the exterior ring.
[alert type="danger" icon-size="normal"]Removal of the protective bubble will void the warranty on any damage that is a result of the bubble missing.[/alert][alert type="danger" icon-size="normal"]This button pointed to by the red arrow will reset the camera and require reprogramming. DO NOT Allow it to be pushed. [/alert]