Training – LETS Info

by | Dec 11, 2017 | Archived

Call us for assistance and set up 888-621-5558 or 925-566-5600

Mobile Recording Platform

 

To control the Body Wire use the following text Commands:

Wire Commands
  • Wire on = ::on
  • Wire off = ::off (if call drops, send Off command before turning it back on, send off command when operation is over)
GPS
  • GPS Locate = ::loc
AutoAnswer
  • AutoAnswer on = ::aa
  • AutoAnswer off = ::aa
Vibrate/Signal
  • Vibrate 3 times = ::v1
  • Vibrate 4 times = ::v2
Phone Onboard Recording Commands
  • Audio On = ::aon
  • Audio Off = ::aoff
  • Video On Back Camera (no audio) = ::von b
  • Video On Audio Back Camera = ::von ab
  • Video On Front Camera (no audio) = ::von f
  • Video On Audio Front Camera = ::von af
  • Video (and audio) Off = ::voff

 

All video recordings are stored on the phone’s SD card in a folder called ‘Video Recordings’. Connect the phone to a computer with a USB cable to see the folder or view the phone’s media library and navigate to the Video Recordings folder.

NOTE: front camera is the one facing you, back camera is the one facing away from you (on the back of the phone). Android 4.0 or better.

 

Outbound / Pretext Call Setup

(This gives the phone a new phone number and records the calls made to and from the phone)

1. Send a text message to the Android phone to setup the LETS outbound calling
Note: Replace 18005551925 with your 11-digit LETS Outbound DID and make sure to include the two colons preceding outnum and a space between the ::outnum and the 11 digit outbound number.

2. If outbound LETS number is setup, all calls will first dial your outbound LETS number when a phone number is entered or contact is selected.

3. When using this feature you will need to always dial the area code of the number you are calling all 10 digits. i.e. 707-220-3445.

 

INVISALISTEN APP SETUP

 

  1. Install Super Status Bar - Turn on app in settings
  2. Add the Wire phone to your LETS account
  3. Turn off Prompts in LETS: LETS ACCOUNT > Settings > Advanced Settings > Disable Wire Voice Prompt
  4. Prepare Phone: Settings > Applications > Allow Unknown Applications (Path may vary)
  5. DOWNLOAD APP to Phone
  6. Disable Sounds
  7. Send a text to the wire phone  "::wnum 1xxxxxxxxxx" (Replace the1xxxxxxxxxx, with your assigned LETS Wire number. Also remember to add a space between the :wnum and the 11 digit wire number. Or, Call us at 925 566-5600 select customer support to activate app.